Add Time:

2017-04-05

Electric ANSI ball valve(150/600LB)

Electric ANSI ball valve(150/600LB)

  • Product Details

Electric ANSI ball valve(150/600LB)

Working Pressure(PN): 150LB

Body: WCB,CF8/CF8M/CF3/CF3M available

Ball: SS,float or trunnion

Stem: SS

Cores: SS 

Seal: PTFE,PPL,PEEK,hard alloy

Port: DN15-DN250

Flange: RF/BW ANSI-300LB

Standard: ASME B16.34

Test: API598

Medium: water,oil,steam,liquefied gas

Temp.:  -40℃--290℃

Operation: manual lever,worm gearbox

Technical Parameters
Working environmentsTemperature: -30'C~+70'C(can be customized to -45'C~+85'C)
Relatively humidity: 95%(25'C)
Pressure: 86kPa~106kPa
Power SupplySingle phase: 220V 50Hz   Three phase:380V 50Hz
Tolerance: Single phase Voltage(-15%/+10%)  Three phase Voltage(±10%)
Frequency(±5%),  harmonic   content   (<5%), Direct Current (±10%)
Insulation resistance1)Resistance between input terminal and case should be more than 20M   .
2)Resistance between input terminal and power supply terminal should be more than 50M   .
3)Resistance between power supply terminal and case should be more than 50M   .
The motor insulation level Level F(Level H is selectable)
Protection levelIP68(underwater 20M\96hours)
Anti-explosion levelEXD IIBT4\EXD IICT4

On-Off Type
Start frequency650 times per hour
Designed lifetimeMinimum maintenance-free time:30,000 times
Working formShort time working type, rated run time will be 15mins(customized to 30mins)

Regulated Type
Start Frequency1200 times per hour
Designed lifetimeNo less than    times
Working formIntermittent periodic-type, minimum rated load sustained rate is 25%
Basic parametersBasic error: ≤ ±0.1%
Hysteresis: ≤ 0.5%
Dead zone: 0.1%~9.9% continuously adjustable
Damping characteristic: undamped
Input and output signalAnalogue input 4-20mADC, input impedance ≤ 250   ;
Analogue output4-20mADC, load resistance ≥ 750   ;
Linear error ≤ 0.5%;
Supply voltage: 24VDC provided by internal actuator;
Actuator with a build-in servo amplifier;
Input and output signal channel take    optoelectronic   isolation 
Passive junction capacity: 250V/5A   AC; 30V/5A DC.

Warm Reminder: More complete drawing and technical specs pls contact us to get.


Electric trunnion 3-way ball valve(PN16 Mpa)
Next:
Electric 3-way flanged ball valve(PN16-64 BAR)
Previous:

electric ball valve

Product>  

SHARE TO

Electric trunnion 3-way ball valve(PN16 Mpa)